DescriptionKebur Porcelain Mineral Cream Cladding is a stunning option to enhance any wall either inside or out. Tiles are 385 x 75 x 9mm (34 pieces per sq mtr) Simply fix to the wall with Tile Adhesive and grout fill the gaps. Mineral Cladding tiles are frost resistant and feature substantial shading variation. Porcelain cladding is also resistant to stains and chemicals, easy to clean and colour stable. Mineral cladding can also be used as a floor tile, however it must be laid using tile adhesive onto a solid concrete base. It should also be noted that these tiles have an R10 slip rating. How to install porcelain claddingBefore laying at the site, the tiler should check the shade, size, and choice of material, whereas when laying the tiler should always use tiles from several boxes to obtain the ideal colour mix.The tiler should also check the product for any obvious flaws before laying, which would not be covered by the guarantee if pointed out after laying. The tiler should use adhesives which are suitable for the various types of use, and follow the instructions on the packaging. Grout-line size can vary according to the format of the tiles, in order to maintain the preferred laying modules. A minimum 2-3mm grout joint is recommended. When laying it is not recommended to stagger tiles by more than 6-10cm (2”-4”). Ensure the top of walls are capped to prevent the ingress of water behind the tiles.How to maintain porcelain claddingFor routine maintenance, we suggest a few days after installation, to clean thoroughly by using water solutions and buffered acids in order to dissolve and remove completely any construction debris.It is also important to rinse well until the wash water turns out clean, to prevent stains difficult to remove caused by improper or late removal of the grouting used on the joints.SpecificationsMaterialPorcelainBrandKebur
